What's New


banner

Alpha loudspeaker systems of Symbio Design


OhEoCha

Alph front iPod dock iPod dock Kharma

 

The design of loudspeaker system is based on a baffle made from laminated composite. A bass-reflex tube is made the same way and, after the manufacturing process completion, it becomes an integral part of the baffle. In addition, the bass-reflex tube orifice shape prevents the turbulence generation with air circulation in the tube, when a higher sound volume is set, which very often adversely affects the systems sound character and brings undesired noises into the performance. The shell is made with laying stress on the standing waves elimination without a single joint, so we eliminated pressure losses. The selected construction provides high shell rigidity with a big inner acoustic attenuation.

The genuine SEAS transducers are imbedded in the loudspeaker systems. The frequency separators are built in the custom printed circuits using high-quality polypropylene condensers and air-core coils. All metal parts are made with no exception by turning or milling from solid duralumin. The manufacturing process is completed by burnishing of all parts. The internal wiring is done using a high-end wiring from Swedish Supra. We use WBT solder with a high content of silver for all soldered joints. For all screw joints, we use stainless and browned jointing material as a matter of principle. The internal space dumping is ensured by polyester lap scarf and synthetic material Fonofoam, which is applied in the immediate surrounding of the mid-buss woofer. The baffle uncompromising design and an accurate design of the separator compose two-way loudspeaker systems with excellent technical parameters. The final checkout of the systems in an acoustically modified listening studio gives the loudspeaker systems a driving and self-confident but also elegant sound and a non-violent performance with a highly balanced frequency characteristic.

Two-way loudspeaker system with a bass-reflex type baffle.

Parameters:

number of bands: 2
baffle type: bass-reflex
recommended placement: floor, shelf, in-wall installation, ceiling
total weight of the system: 5.5 kg/piece
max. high 580 mm
max. width 330 mm
max. depth 470 mm

Woofer

response (1W,1m): 91 dB SPL
frequency characteristics: 40 - 4000 Hz
nominal impedance: 8 Ohm
weight 1,41 kg
long-lasting maximum power 75 W
short-lasting maximum power 250 W

Tweeter

response (1W,1m): 92 dB SPL
frequency characteristics: 2000 - 25000 Hz
nominal impedance: 6 Ohm
weight 0,5 kg
long-lasting maximum power 90 W
short-lasting maximum power 220 W

Price ................... N/A

 

Source: Symbio Design

 


 
All rights reserved by AudioResource.NET Copyright 2007   | Contact: thaiaudioresource@yahoo.com